Television Entertainment Enhancement System OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION TVee™ Model Two A Boston P.O.P. Product Make it your own...
Quick QuickGuide Guide Did Did you you know knowTVee TVee can can learn learn your your tele tel Did you know TVee can learn your television remote control? ™ IfIfyour television can be setup change audio volume it sends to TVee,ityou don’tto need this quick start guide.
IMPORTANT SAFETY INSTRUCTIONS This symbol found on the apparatus indicates hazards arising from dangerous voltages. This symbol found on the apparatus indicates the user should read all safety statements found in the user manual. This symbol found on the apparatus indicates double insulation. Warning! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions.
The Parts of TVee 1 2 3 4 5 6 7 8 INPUT R DC24V 2.5A TRIM LEVEL WIRELESS ID 3 2 9 POWER 1 L MUTE 1234 INPUT R TRIM LEVEL 3 WIRELESS ID 2 POWER DC24V 2.5A 1 L 1234 Audio connection cable 10 1 2 3 4 5 6 7 8 9 10 Status Indicator – Lights in various colors to indicate operating status. See the table below. Power Button – Lets you manually activate TVee or put it in standby mode. Mute Button – Lets you temporarily mute TVee.
11 WIRELESS ID 4321 WIRELESS ID 4321 12 VOLUME POWER MIN FUSE T1A/250V AC120V/60HZ VOLUME MAX MIN 11 12 13 14 15 16 13 14 POWER 15 16 FUSE T1A/250V AC120V/60HZ MAX Wireless ID Switch – Selects the “channel” for the wireless bass unit signal. Set in the same position as 5. Volume – Adjusts the volume of the bass unit to balance with the soundbar. Status Indicator – Lights red when the bass unit is active and green when it is in standby mode.
Connect TVee Next you need to get an input signal into the TVee soundbar. All it takes is the audio connection cable that is supplied. There are two likely sources for a signal—your television or a cable television connection box. (The control box for a satellite system is for this purpose the same as a cable box. For simplicity we’ll call it a cable box, but it could be either one.) The main advantage of getting the signal from the cable box is that it is easier to set up.
After this adjustment TVee should always be louder than the television speaker. Then you can use the television remote control to adjust the volume as you normally do. Fine Tune TVee Now that things are up and running, it’s time to adjust the bass unit to blend with the soundbar speakers so the system produces the balanced, natural Boston sound. Start with the bass unit volume control at the middle of its rotation range.
Typically you’ll never need to adjust these switches. What are they for? If you have more than one TVee system in your house you can use different Wireless ID Switch settings so the systems won’t interfere with each other. Trim Level Switch – This changes the input sensitivity of TVee. If the output of your television is too low, you may need to change the trim level switch to “1” to make it louder. Conversely, if you hear distortion in the audio signal, try the “3” setting to make the input quieter.
Limited Warranty Boston Acoustics warrants to the original purchaser of our TVee system that it will be free of defects in materials and workmanship in its mechanical parts for a period of 5 years from the date of purchase. The warranty period for the electrical components of TVee is 1 year.
300 Jubilee Drive, Peabody, MA 01960 USA www.bostonacoustics.com Boston, Boston Acoustics, and the Boston Acoustics logo are registered trademarks and TVee is a trademark of Boston Acoustics, Inc. Specifications are subject to change without notice. © 2007 Boston Acoustics, Inc.