User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation and starting up
- 5 Connections and controls
- 6 Operating
- 7 Technical specifications
- 8 Protecting the environment
6.1.1 Button combination for standby mode
In the delivery state, the standby mode can only be exited by pressing the button. To exit
the standby mode with any key, perform the following steps 1 to 3.
1.
Press and hold [P] and simultaneously for about ten seconds.
ð
The LEDs of all buttons ash briey once.
2.
Press .
ð
The device is being put into standby mode.
3. To start the device, press any key.
4.
Press and hold [P] and simultaneously for about ten seconds to cancel the button
combination.
ð
The LEDs of all buttons ash briey once.
Operating
24
ART-4 RGBW / ART-9 RGBW
DMX controller