User manual

The Receive (CH:...) mode is to be selected when an external DMX or MIDI controller is used.
The Receive (CH:...) mode is selected, in the display, the LED [Receive] lights up.
1. To enter the device settings, press [MENU].
ð
Settings for MIDI-IN channels, MIDI note number and DMX start address can be
made here.
2. Select the DMX start address. Press [MENU] repeatedly until the display shows ‘A:xxx’ .
Use [UP] and [DOWN] to set the desired DMX start address to a value between ‘A:001’
and ‘A:512’ .
3. Select the MIDI-IN channel. Press [MENU] repeatedly until the display shows ‘CH:xx’ . Use
[UP] and [DOWN] to set the desired channel ‘CH:01’ to ‘CH:16’ .
4. Select the MIDI note number. Select ‘MIDI-Note Number’ . Press [MENU] repeatedly until
the display shows ‘N:xxx’ . Use [UP] and [DOWN] to set the desired value ‘ N:001’ to
‘N:128’ .
Receive (CH:...)
That's how you congure your
device with an external DMX or
MIDI controller:
Operating
24
MPX 405
dimmer pack