User manual SD-10 DMX recorder
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 05.03.
Table of contents Table of contents 1 General notes............................................................................................................................................... 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.
Table of contents 9 4 SD-10 DMX recorder Protecting the environment..............................................................................................................
SD-10 DMX recorder 5
General notes 1 General notes This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change.
General notes 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General notes 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ .
General notes Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. NOTICE! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This unit is used to record and playback DMX signals. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual cur‐ rent circuit breaker. Failure to do so could result in damage to the device and pos‐ sibly the user.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations.
Features 3 Features n n n n n n n 14 SD-10 DMX recorder DMX input for recording DMX sequences DMX output Data storage for 96 channels, 9 chases and 9 strobe programmes, each with up to 48 steps Playback of DMX sequences on the DMX output either manually or timer controlled Speed and fading between recorded scenes adjustable Sound-controlled operation via built-in microphone possible Operating via buttons and display on the unit
Installation and starting up 4 Installation and starting up Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation and starting up DMX connections 16 SD-10 DMX recorder Connect the DMX input of the DMX recorder (R) to the DMX output of a DMX controller (C). Connect the output of the DMX recorder (R) to the first DMX device (1), such as a spotlight. Connect the output of the first DMX device (1) to the input of the second one and so on, to form a series connection. Make sure that the output of the last DMX device (n) in the chain is terminated by a resistor (110 Ω, ¼ W).
Installation and starting up DMX indicator While both the device and the DMX controller are in operation, the [DMX] LED lights up and thereby indicates that a DMX signal is being received on the input. Connect the included AC adapter to the device, then to the mains. Switch the unit on with the main switch to start operation.
Connections and controls 5 18 Connections and controls SD-10 DMX recorder
Connections and controls 1 [POWER] Main switch. Turns the device on and off. 2 DC INPUT Connection for the supplied power adapter. 3 [DMX IN] DMX input 4 [DMX OUT] DMX output 5 [DISPLAY] n [DMX]: Indicates that a DMX signal is being received. n [AUDIO]: Lights when playing in Audio mode. n [MANUAL]: Lights when playing in Manual mode. When playing back in Auto mode, neither [AUDIO] nor [MANUAL] will light. 6 [DOWN] / Decreases the displayed value by one.
Connections and controls 7 [RECORD/MODE] Turns Recording mode on. 8 [PROGRAM] Selects chaser programmes for recording or playback. 9 [BLACK-OUT] Function button with different meaning, depending on the current mode. 10 [FADE+SPEED/DEL] Function button with different meaning, depending on the current mode. 11 [SPEED] Function button with different meaning, depending on the current mode. 12 [STROBE] Selects strobe programmes for recording or playback. 13 [UP] / Increases the displayed value by one.
Operating 6 Operating 6.1 Record Recording a programme 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. The display shows the programme and its last scene. 2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes. ð The LED next to the corresponding button lights up. 3. Press [UP] or [DOWN] to select the desired programme. You can choose between 9 chaser and 9 strobe programmes. 4. Press [RECORD/MODE] to record a scene.
Operating Deleting a programme 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. 2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes. ð The LED next to the corresponding button lights up. 22 SD-10 DMX recorder 3. Press [UP] or [DOWN] to select the desired programme. 4. Press [FADE+SPEED/DEL] to delete the selected programme.
Operating Deleting a scene 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. 2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes. ð The LED next to the corresponding button lights up. 3. Press [UP] or [DOWN] to select the desired programme. 4. Press [RECORD/MODE]. 5. Use [UP] or [DOWN] to select a scene you want to delete. 6. Press [FADE+SPEED/DEL] to delete the selected scene.
Operating Adding a scene 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. 2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes. ð The LED next to the corresponding button lights up. 24 SD-10 DMX recorder 3. Press [UP] or [DOWN] to select the desired programme. 4. Press [RECORD/MODE]. 5. Use [UP] or [DOWN] to select the scene where you want to add another. 6. Now create a scene on your DMX controller.
Operating Showing preview for a scene 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. 2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes. ð The LED next to the corresponding button lights up. 3. Press [UP] or [DOWN] to select the desired programme. 4. Press [RECORD/MODE]. 5. Press [PROGRAM] or [STROBE]. ð The LED next to the corresponding button lights up. 6. Use [UP] or [DOWN] to select the desired scene. 7.
Operating Recording AS/AP scenes 1. Press and hold [RECORD/MODE] for five seconds. ð The LED above the button lights up. The display shows the programme and its last scene. 2. Use [UP] or [DOWN] to choose between ‘AS’ (strobe programme) and ‘AP’ (chaser pro‐ gramme). 3. Press [RECORD/MODE]. 4. Press [RECORD/MODE] to record a scene. Now create a scene on your DMX controller. If you want to record this scene, press [RECORD/MODE]. ð As soon as all the LEDs light up, the scene is saved. 5.
Operating 8. Press [UP] or [DOWN] to set the beat or fade time of the current step. 9. To go to the next step, press [PROGRAM] (for AP scenes) or [STROBE] (for AS scenes). 10. Press [UP] or [DOWN] to select the next scene. Repeat steps 7, 8, and 9 until each step has a beat and a fade time assigned to it. 11. Press [BLACK-OUT] to return to the AS / AP programme. 12. Press [RECORD] to exit the Recording mode. 6.2 Playback When you turn on the device, it is automatically in Run mode.
Operating Programme playback in Manual mode 1. Press [RECORD/MODE] repeatedly until the [MANUAL] LED lights up. 2. Press [PROGRAM] or [STROBE] repeatedly until you have selected the desired pro‐ gramme. 3. If necessary: disable [BLACK-OUT]. 4. Press [UP] or [DOWN] to play the scene step by step. 1. Press [RECORD/MODE] repeatedly until the [AUDIO] LED lights up. 2. Press [PROGRAM] or [STROBE]. 3. If necessary: disable [BLACK-OUT]. 4.
Operating Programme playback in Auto mode 1. Press [RECORD/MODE] repeatedly until neither the [AUDIO] nor the [MANUAL] LED light up. 2. If necessary: disable [BLACK-OUT]. 3. Press [UP] or [DOWN] repeatedly until you have selected the desired programme. ð When the programme is selected, it will play at the speed you have selected. You can set the speed in a range from 10 steps/s to 1 step/600 s. Setting the programme speed 1.
Operating 6.3 Data exchange Sending data 30 SD-10 DMX recorder 1. Press and hold [BLACK-OUT] for three seconds. 2. Press [PROGRAM] and [BLACK-OUT] simultaneously. If the device has stored scenes, the display shows ‘OUT’ , indicating that data can be sent. Otherwise the display shows ‘EPTY’ – all programs are empty. 3. Make sure that the receiving device is in Receive mode to fully receive the file. 4. Press [FADE+SPEED/DEL] to send the data set. During sending, no other functions are accessible.
Operating Receiving data 1. Press and hold [BLACK-OUT] for three seconds. 2. Press [STROBE] and [BLACK-OUT] simultaneously. If the device has saved scenes, the dis‐ play shows ‘SURE’ , otherwise ‘IN’ . 3. Press [FADE+SPEED/DEL] to receive the data set. ð The display shows ‘IN’ . 4. When receiving is complete, the display shows ‘END’ . Press any button to exit this mode.
Operating 6.4 Special functions Setting up Black-out mode 1. Switch off the device. 2. Press [SPEED] and [BLACK-OUT] while turning the power on. ð If the display shows ‘Y-Bo’ the unit will not show any output after powering up. If the display shows ‘N-Bo’ output is active after powering up. 3. Press [FADE+SPEED/DEL] to switch between ‘N-BO’ and ‘Y-BO’ . 4. Press [PROGRAM] to complete the setting. 1. Switch off the device. 2.
Technical specifications 7 Technical specifications Voltage supply Wall plug transformer (12 V/ 300 mA ), centre positive Dimensions (W × H × D) 220 mm × 65 mm × 72 mm Weight 0.
Plug and connection assignments 8 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 36 SD-10 DMX recorder
Notes SD-10 DMX recorder 37
Notes 38 SD-10 DMX recorder
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
