Owner`s manual
3-4
Remove each of the foam end-caps. 3.
Lay the unit so that it is at and the sealing tape is facing 4.
upwards.
Pull the tab on the end of each piece of tape so that the 5.
foam inner-wrap can be easily removed.
Remove the foam wrap and lay the 1021 at on its feet. 6.
Inspect the 1021 for any damage. 7.
We strongly suggest that you save all the packing materials. If
the 1021 must be returned to your dealer or to Boulder Ampliers,
the original packing material must be used for shipment to avoid
damage. Neither Boulder Ampliers nor the shipper can be held
responsible for damages incurred during transit if the original packing
is not used.
Unpacking the 1021
1021 Rear
Panel
AC Mains
Voltage