Owner`s manual

7-2
Installation of the 1021 is simple and straightforward. Be sure all
cables to be connected to the 1021 are already in place. Note: as
the 1021 is very heavy, it is advisable to have two people install the
1021 to prevent damage.
Place the 1021 on the shelf or stand where it will be 1.
permanently installed. If the Player is going to be installed in
a cabinet or rack, please be aware that adequate ventilation
is necessary or damage to the player may occur. The 1021
should not be completely enclosed without some sort of
forced air ventilation.
If you will have access to the rear panel after placement, 2.
the 1021 should now be moved into its nal position. Be sure
that there is adequate ventilation for the rear panel heatsink
and the vents in the top cover. There should be at least 3.5”
of space on all sides if the 1021 is to be placed in a rack or
enclosure.
If you will not have access to the rear panel after placement, 3.
all interconnect and system cables should be connected
before moving the 1021 into its permanent location. Please
see Connecting the 1021 to Your System in the next section.
Installing the 1021
Installing
The 1021