Owner`s manual
8-2
The 1021 Disc Player is a very versatile machine and can be
connected to your audio/video system in a number of different ways.
To maximize the performance of your 1021 Disc Player, please follow
the appropriate instructions for your system and use.
All connections should always be made with the rear panel Master
AC Switch in the OFF position.
Connecting the 1021 to a Preamplier
To connect the 1021 to a preamplier, the volume control must rst
be set to “Fixed” in the menu system (see page 11-12). For optimum
performance, it is recommended that the 1021 be connected in an
all-balanced, 3-pin XLR system.
Connect the Left channel interconnect cable (usually white) to
one of the Left channel output connectors of the 1021. As both
connectors are the same, it does not matter which left channel
connector is used. The other end of the cable should be connected
to the left channel preamplier input.
Connect the Right channel interconnect cable (usually red) to
one of the Right channel output connectors of the 1021. As both
connectors are the same, it does not matter which right channel
connector is used. The other end of the cable should be connected
to the right channel preamplier input.
Connecting the 1021 Directly to a Power Amplier
When the internal volume control is activated, the 1021 is capable of
driving the inputs of a power amplier directly.
To connect the 1021 directly to a power amplier (without the use of
a preamplier), the volume control must rst be set to “Variable” in
the menu system (see page 11-12). For optimum performance, it is
recommended that the 1021 be connected in an all-balanced, 3-pin
XLR system.
Connecting the 1021 to Your System
Connecting
The 1021