Owner`s manual

8-8
Connecting an External Display
The 1021 Disc Player has a large, 6.5” display that is easy to read from a
distance. The 1021 is also capable of driving an external display de-
vice (such as a computer or video monitor or projector).
To use the external display feature of the 1021, the monitor or projec-
tor must have a VGA input connection. All graphic information will be
sent at the native resolution of the 1021 Disc Player (640 x 480). Please
contact your Boulder dealer for further information regarding the
External Display connection to your computer, video monitor, or home
theater video display system.
Connecting the 1021 to AC Mains
Once all of the necessary rear panel connections have been
properly secured, the 1021 can then be connected to AC mains
and powered up. The 1021 Disc Player uses a standard 3-pin 15A
IEC power connector. Install the provided power cable to the AC
mains power connector on the rear panel. The unit can then be
connected to your AC mains wall outlet and the Master AC Switch
moved to the ON position. The front panel Status Indicator LED
should now be illuminated.
Connecting the 1021 to Your System
Connecting
The 1021