Owner`s manual

11-4
Creating a Playlist
You can create a Playlist for any disc for selecting and ordering the
tracks to be played. In this mode, only tracks in the programmed
playlist will be played. The 1021 will remember programmed playlists
and will play the last programmed playlist when that disc is inserted at
a later date (unless cancelled by pressing the Stop button twice while
that disc is in the machine). It is possible to program a playlist with ei-
ther the remote control or the front panel buttons.
To program a playlist into the 1021, use the following sequence:
Insert a disc but do not press play. Allow the player to read 1.
the disc and display a track listing.
Using the 2. Navigate Up or Navigate Down button, scroll to a
track that you would like to add to a playlist.
Press the 3. Enter button. The track has now been “tagged” and
moved to the top of the Track List. A small dot or circle should
also be located to the left of the track name to indicate that it
has been programmed.
Locate and select as many tracks as you would like to add to 4.
the playlist. They will be added in the order you select them.
The tracks that have not been selected will remain at the
bottom of the track listing.
Press 5. Play. The 1021will play the tracks in your programmed
playlist in the order that you selected them. Playback will stop
when the last track in your playlist has ended.
To clear or erase the playlist, press the 6. Stop button twice
while the disc is still in the 1021. If the disc is ejected and
removed before the Stop button is pressed twice, the 1021 will
remember your programmed playlist. The next time that CD is
inserted in the 1021, it will load and play only the programmed
playlist unless the Stop button is pressed twice.
Advanced Operation
Advanced
Operation