Owner`s manual

11-8
Repeat Play
When activated, the Repeat Play options will allow the 1021 to repeat
the entire disc, one track of the disc, or a selected portion of the disc
(A-B).
To activate Repeat Play, enter the Options list and move the
highlighting to the Repeat Play icon. Select the mode of Repeat Play
you wish to use by using the Navigate Left or Navigate Right button.
The mode of Repeat Play will appear within the circular arrow icon.
Pressing the Enter button will turn the icon green and activate Repeat
Play.
To deactivate Repeat Play mode, press the Stop button twice.
The three modes of Repeat Play are listed below:
Repeat Track: When selected, the 1021 will continually repeat
the track that is presently playing. Playback will not stop until
Repeat Play is deactivated or the Stop button is pressed.
Repeat Disc: When selected, the 1021 will continually repeat
playback of the entire disc when it reaches the end of the last
track. If a Playlist has been programmed, only the selected
tracks will be repeated. Playback will not stop until Repeat Play
is deactivated or the Stop button is pressed.
Repeat A-B: When selected, the 1021 will repeat playback of
only a selected portion of a disc. To mark the beginning of the
repeated portion of the track, select Repeat A-B in the Options
List while the desired track is playing. At the point where you
would like to have the repeated section of the track begin,
press the Enter button. The beginning of your selection will be
marked by a green “A” on the Progress Bar. At the point where
you would like to have the repeated section of the track end,
press the Enter button again. The end of the selection will be
marked by a red “B” on the Progress Bar. The 1021 will now
continuously repeat the portion of the disc between the pro-
grammed “A” and “B” markers. Repeat A-B Play will not stop
until Repeat Play is deactivated or the Stop button is pressed.
Advanced Operation
Advanced
Operation