Owner`s manual

11-10
Disc Scan Playback
When activated, the Disc Scan Playback option will allow the 1021
to play only the introduction of each track. This is helpful in locating
a track when you do not know the name of the track or track name
information is not available and you do not wish to skip through each
track manually.
To activate Disc Scan Playback, enter the Options list and move the
highlighting to the Disc Scan Playback icon. Press the Enter button.
The Disc Scan Playback icon should then turn green. The 1021 will be-
gin playing the rst few seconds of each track (for instructions to pro-
gram the length of each track that the 1021 will play, please see page
2-14). Press the Options button. Once the desired track has been
located or to turn the Disc Scan Function off, press the Play button.
Setup Tools
The Setup option allows you to program a number of personal prefer-
ences into the 1021.
To access the Setup menus, enter the Options list and move the
highlighting to the Setup Tools icon and press the Enter button. The
display will now show the Main Setup Menu, which includes the
Display Menu, Audio Menu, Track List Menu, Player Menu, Network
Menu, Boulder Link Menu, Factory Reset Menu, and Back to Player.
Main Setup Menu
You can customize the 1021 by programming a number of user
options and preferences in the Setup menus. While these options do
not have to be programmed in order to enjoy the use of the 1021,
additional programming may enhance your experience with the
player. The following pages will instruct you on the function of each
option as well as how to program it.
To enter the Main Setup Menu, enter the Options list and move the
highlighting to the Setup Tools icon and press the Enter button. The
Advanced Operation
Advanced
Operation