Owner`s manual
12-24
The Baud Rate submenu can be set to 4800 or 62500. The
default setting is 62500. To select a baud rate, use the
Navigate Left or Navigate Right button to select a specic
rate. Consult your dealer before changing this setting.
Device List Menu
The Device List Menu indicates the Master/Slave status of the
1021 and if any other Boulder products are connected via
the Boulder Link system. Ampliers are indicated as “AMP,”
followed by their Boulder Link ID number (for example, AMP
01). Other components are indicated as “DEV,” followed by
their Boulder Link ID number.
Back to Prev Menu
Pressing the Enter button while Back to Prev Menu is
highlighted will take you back to the Boulder Link Menu.
Back to Player
Pressing the Enter button while Back to Player is highlighted
will exit the menu system and take you back to the Track List
display.
Factory Reset Menu
The Factory Reset Menu is used to return all programmed menu and
submenu settings to factory defaults. Menu options of Cancel or Reset
All Now are available.
To navigate the Factory Reset Menu, use the Navigate Up or Navigate
Down button and then press Enter once the desired option is highlight-
ed.
Note: If the Enter button is pressed when the Reset All Now option is
highlighted, all software options will be reset to factory defaults and all
of your programmed preferences will be lost.
Setup and Programming
Setup &
Programing