Owner`s manual

29843-2-0612 Page 35

OPERATING INSTRUCTIONS

RF VALVE OPERATION

(AF-4044 Electronic Gas Valve system only)

NOTE: THE FIREPLACE WILL ONLY OPERATE WITH THE

HAND HELD REMOTE TRANSMITTER. THE TRANSMITTER

CONTROLS ALL FUNCTIONS OF THE FIREPLACE.

Please refer to the separate instructions for detailed operation and

programming of the Multi-function Remote Control.

The AF-4044 Electronic Gas Control Valve features a Remote

controlled High/Low Variable - 6 Volt DC Motor Drive. This gas

control uses a spark to pilot burner assembly. For use with Pro-

pane or natural gas (pre-set at the factory).

This gas control system includes the items identied in Figure 53.

SPECIAL FEATURES ON THE CONTROL MODULE

The Control Module has two special pilot mode features built into

the system.

CONTINUOUS PILOT FEATURE: This allows the user to change

from a spark to pilot system to a standing pilot system.

1. There is a switch located on the right side of the Control

Module (#4) that reads CONTINUOUS PILOT ON/OFF. This

switch will allow the user to select the pilot mode of opera-

tion.

2. When the continuous pilot switch is in the OFF position and

the appliance turned ON, the pilot will spark and light, then the

main burner will light as well. When the appliance is turned

OFF, the pilot and main burner will shut OFF.

3. When the continuous pilot switch is in the ON position and

the appliance is turned ON, the pilot will spark and light. Then

when the appliance is turned OFF the pilot will remain ON,

but the main burner will shut OFF.

Note: The Continuous pilot mode setting is generally recom-

mended on Direct Vent appliances during cold climate sea-

sons to help keep the rebox warm.

Index No. Description

1 Battery Back-up

2 AF Valve, RF

3 AF Control Module

4 AF Extension Module

5 AC Adapter

Pilot Assembly - Nat

Pilot Assembly - LP

Not Shown Remote Control

►

◄

▲

Figure 53