Owner`s manual

29843-5-1012 Page 31
FINISHING THE WALL
Finishing The Wall For DF414BL DF41W Series &
DF41EHPBL Decorative Front
Aminimumof5/8in.(15.8mm)isrequiredfromthebottomofthe
replacetothetopofthehearthextensionmaterial.
Aminimumof1/8in.(3mm)isrequiredfromthesideoftheunit
tocombustiblematerial.
◄
5/8” (15.8mm)MINIMUM
FROM BOTTOM OF UNIT
TO TOP OF HEARTH
EXTENSION MATERIAL
55-1/2” x 13-1/2”
NON-COMBUSTIBLE BOARD
1/8” (3mm) MINIMUM
FROM SIDE OF UNIT
TO COMBUSTIBLE MATERIAL
Figure 48
Finishing The Wall For DF41W Series, DF41EHPBL, DF414BL
Decorative Front With Finishing Materials Less Than 1 in.
(25.4mm) Thick - Figure 45
Stopnishingmaterialsatthetopandbottomoftheunit.
Finishingmaterialsupto1in.(25.4mm)thickmaycomeupto
thesidesoftheunit.TheOptionalFrontwilloverlapthenishing
materials.
►
▼
◄
▲
24-1/4”
(616mm)
51”
(129.5cm)
5/8” (15.8mm) MINIMUM
FROM BOTTOM OF UNIT
TO TOP OF HEARTH
EXTENSION MATERIAL
Figure 49
Finishing The Wall for DF414BL, DF41W Series, & DF41EHPBL
Decorative Front With Finishing Materials Greater Than 1 in.
(25.4mm) Thick
Fornishingmaterialsover1in.(25.4mm)thick,centertheunitside
tosideina26in.x53-34in.(660mmx136.5cm)opening.Thefront
willtinsidethenishingmaterial.
StopFinishingMaterials1in.(25mmfromthetopoftheunit.This
willallow3/8in.(10mm)ofspaceforliftingthefronttounhookand
removeit.
StopFinishingMaterials3/4in.(19mm)fromthebottomoftheunit.
26”
(660mm)
53-3/4”
(136.5cm)
◄
◄
1” (25.4mm) MINIMUM
FROM FINISHING MATERIAL
TO TOP OF UNIT
3/4” (19mm) MINIMUM
FROM FINISHING MATERIAL
TO BOTTOM OF UNIT
Figure 50