Operating Manual

Operating Manual - Recce 360 mini (V2.0 20220524)
6.6 Range - frame rate
Symptom: Short-range
Check:
Verify whether all the illumination LEDs are working:
1. Ensure the camera can be properly charged (see sections 3.2 and 6.1). Connect from
the receiving device to the camera.
2. Place the camera approximately 1m (3ft) or more from the ground in an open outdoor
area with little wifi interference.
3. At close range, verify functionality by checking for smooth (10 fps) received video data.
4. Move further away from the camera while checking the received video data. At some
distance, the frame rate will drop significantly to approximately 1 fps. The current
distance from the camera defines the range.
Symptom: Low frame rate
Check:
1. Turn off the camera.
2. Ensure the camera is properly charged (see sections 3.2 and 6.1) at room temperature.
3. After charging finishes, disconnect the charger and wait at least one hour.
4. Connect from the receiving device to the camera and verify the framerate.
5. If the frame rate is not normal, perform a range check.
6.7 Scene illumination
Symptom: Scene not well illuminated
Check:
Verify whether all the illumination LEDs are working:
5. Ensure the camera can be properly charged (see sections 3.2 and 6.1). Connect from
the receiving device to the camera.
6. Verify the illumination is enabled (lightning symbol in app). If the camera flash mode is
enabled, this will cause a clicking sound. If the camera is in continuous illumination mode
a very faint high pitched sound may be heard.
7. By pointing a regular digital camera (from a mobile device) at the illumination LEDs (top
view - E) in a dark room, the functionality can be verified. The working LEDs will show up
in figure 7 (below).
8. Check the functionality of every LED (4 around every lens).