User`s guide

Usage Notes

The following notations and symbols are used in this manual:

 Ctrl-F1: the two keys, Ctrl and F1, are to be pressed simultaneously.

 Ctrl, F1: the two keys, Ctrl and F1, are to be pressed in succession.

 1-num or 1-alph: specifies that the number must be generated either from the numeric or alphanumeric

keypads.

 23h: the number 23 is represented in hexadecimal (hex) notation.

 applies to ASCII emulations only: ADDS-VP, Wyse 50+, Wyse 60, PC Term, and TVI-925.

 applies to ANSI emulations only: VT300/8, VT300/7, VT200/8, VT200/7, VT100, SCO Console, and

AT386.

 applies to SCO Console and AT386.

 applies to parallel attribute emulations only: includes all emulations except ADDS-VP, TVI 925 and

Wyse 50+ (which are field attribute emulations).

 applies to ASCII key mode only.

 applies only to Scan Code key mode.

 applies to the PC/+ or EPC keyboards only.

 applies to the ANSI keyboard only.