OWNER’S MANUAL The Quick Silver is an easy to use detector. The most difficult aspects of metal detecting have been automated. However if you are new to the hobby, we strongly recommend that you: 1) Adjust the Sensitivity to a low setting in the event of false signals. The detector powers on a 3/4 sensitivity; increase to full sensitivity after you have become familiar with the detector. 2) Do not use indoors. This detector is for outdoor use only.
TABLE OF CONTENTS Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Quick-Start Demo . . . . . . . . . . . . . . . . . . . . . .7-8 Basic Operation Powering Up . . . . . . . . . . . . . . . . . . . . . . . .9 The Display . . . . . . . . . . . . . . . . . . . . . .9-10 Operating Controls . . . . . . . . . . . . . . . . . . . . . .
TERMINOLOGY The following terms are used throughout the manual, and are standard terminology among detectorists. ELIMINATION Reference to a metal being "eliminated" means that the detector will not emit a tone, nor light up an indicator, when a specified object passes through the coil’s detection field.
ASSEMBLY Nut Adjusting the Arm Rest The arm rest may be moved forward or backwards by removing the single screw and nut, and then repositioning the 2-piece arm rest. Users with shorter arms may find the arm rest more comfortable in the forward position. In order to move the arm rest backwards, the plastic plug must be removed from the aluminum tube. Arm Rest Strap (not included) Some users prefer to use a strap when swinging the detector vigorously, in order to hold the detector secure against the arm.
ASSEMBLY Assembling your Quick Silver Metal Detector is easy and requires no tools. Just follow these steps: 1 Using ● the supplied bolt and knurled knob, attach the search coil to the lower stem. 2 Press the button on the upper end ● of the lower stem and slide the lower stem into the upper stem. Adjust the stem to a length that lets you maintain a comfortable upright posture, with your arm relaxed at your side. Maintain the search coil about 1 inch above the ground as you sweep.
BATTERIES IMPORTANT: Always use ALKALINE batteries only. Do not use heavy duty batteries. DON’T MIX OLD AND NEW BATTERIES Always remove the batteries for prolonged storage. CHECK THE BATTERIES if your detector exhibits any of the following symptoms: 1 ● 2 ● 3 ● The unit does not turn on. Low speaker volume. Unit beeps continuously or erratically. The LOW BATTERY indicator will come on and stay on if the batteries are discharge. You may notice erratic beeping if using with LOW BATTERY illuminated.
QUICK-START DEMONSTRATION I. Supplies Needed • A Medium-Size Nail • A Nickel • A Quarter • A Zinc Penny (dated after 1982) II. Position the Detector a. Place the detector on a table, with the search coil hanging over the edge. (or better, have a friend hold the detector, with the coil off the ground) b. Keep the search coil away from walls, floors, and metal objects. c. Remove watches, rings and other jewelry or metal objects from hands and wrists. d.
QUICK-START DEMONSTRATION a. An “X” will appear under the IRON segment. b. The “X” tell us that Iron has been eliminated from detection. VI. Wave the Nail over the Search Coil a. The Nail will not be detected. b. The Nail has been "Discriminated Out." VII. Wave the Quarter, Penny, and Nickel over the Search Coil These non-ferrous objects will be detected with their own distinctive tones. VIII. Press the TARGET REJECT touchpad again Another “X” will illuminate under “AL ZN”. IX.
BASIC OPERATION POWERING UP Press the ON touch pad. All display indicators will illuminate momentarily The inverted-pyramid depth-selection indicator on the right of the display will stay illuminated. UNDERSTANDING THE DISPLAY 1 DEPTH SELECT ● The detector default to 3/4 sensitivity, indicated by two illuminated segments. To change the depth range of the detector, and thus its sensitivity to more deeply buried objects, use the DEPTH SELECT touch pad.
BASIC OPERATION 3 PROBABLE TARGET ● The four categories depicted across the top of the display indicate the probable identification of buried, detected metal objects. The search coil must be in motion over an object to be detected. Alternatively, you can pass an object over a motion less search coil to test your detector. One of the four target indicators will illuminate, indicating the probable identification of the object. The indicator will remain illuminated until another object is detected.
BASIC OPERATION 4 REJECTED TARGET ● When “X” appears under a target category, objects falling into this category are eliminated from detection. This feature is commonly referred to as target discrimination. With each press of the REJECT TARGET touch ad, you will progressively eliminate, from left to right, the common, less desirable, targets.
BASIC OPERATION ENVIRONMENTAL CONDITIONS WATER HUNTING: Your Quick Silver is ideal for damp grass and shallow water spots. the search coil is waterproof; the case and case-to-cable connection is not. Be careful to keep the detector body dry. In saltwater, keep the search coil from contact with the ground. Contact with saltwater sands will cause the detector to beep falsely. For best result in saltwater, eliminate IRON to reduce false signals caused by conductive beach sands.
AUDIO TARGET IDENTIFICATION While the LCD (Liquid Crystal Display) is very accurate in identifying buried objects, the user in the field does not always maintain the display screen in his field of vision. Therefore, we have incorporated an audio feedback mechanism to alert the user to the nature of buried objects. This audio feedback system first alerts the user to the presence and classification of objects, whose nature and location can be confirmed using the LCD display.
DEPTH SELECT (Sensitivity Adjustment) Upon power-up, the detector defaults to 3/4 sensitivity. To increase to full sensitivity, press the DEPTH SELECT touchpad once. ELECTROMAGNETIC INTERFERENCE The principle use for the Sensitivity Control is to eliminate Electromagnetic Interference (EMI). A hobby metal detector is an extremely sensitive device; the search coil creates its own magnetic field and acts like an antenna.
IN THE FIELD TECHNIQUES PINPOINTING COIL MOVEMENT Accurate pinpointing takes practice and is best accomplished by “X-ing” the target area. When swinging the coil, be careful to keep it level with the ground about one inch from the surface. Never swing the coil like a pendulum. 1. Once a buried target is indicated by a good tone response, continue sweeping the coil over the target in a narrowing side-to-side pattern. 2. Take visual note of the place on the ground where the “beep” sounds. 3.
IN THE FIELD TECHNIQUES Swing the search coil slowly, overlapping each sweep as you move forward. It is important to sweep the coil at a consistent speed over the ground as you search. After identifying a target, your sweep technique can help in identifying both the location and the nature of the target. If you encounter a weak signal, try moving the coil in short, rapid sweeps over the target zone; such a short rapid sweep may provide a more consistent target identification.
TROUBLESHOOTING TROUBLESHOOTING GUIDE SYMPTOM CAUSE Detector chatters • Using detector or beeps erratically indoors • Using detector near power lines • Using 2 detectors in close proximity • Highly oxidized buried object • Environmental electromagnetic interference SOLUTION • Use detector outdoors only • Move away from power lines • Keep 2 detectors at least 30’ apart • Only dig up repeatable signals • Reduce sensitivity until erratic signals cease Constant low tone • Discharged batteries • Replace batt
METAL DETECTING APPLICATIONS COIN SHOOTING: The most popular metal detecting activity. Find coins where people congregate frequently. Many detectorists revisit the same areas again and again to find a never-ending treasure trove as people continue to lose valuables every day. Parks, fairgrounds, and play ares are good choices. The most valuable old coins are frequently found in abandoned home sites, or if you live on an older property, maybe in your own backyard. Control settings required.
TREASURE HUNTER’S CODE OF ETHICS: • Always check Federal, State, County and local laws before searching. • Respect private property and do not enter private property without the owner’s permission. • Take care to refill all holes and leave no damage. • Remove and dispose of any and all trash and litter found. • Appreciate and protect our inheritance of natural resources, wildlife and private property. • Act as an ambassador for the hobby, use thoughtfulness, consideration and courtesy at all times.
ACCESSORIES Carry Bag Rugged double-stitched construction - CBAG-W Pouch & Digger Combo Pouch with 2 large pockets & 9” heavy duty digging tool. TP-KIT-W Bounty Hunter Stereo Headphones. Use with Bounty Hunter metal detectors. Lightweight and adjustable with true stereo sound, adjustable volume, 1/8 jack with 1/4 adaptor, 4’ cable. HEAD-W Pin Pointer Pinpoints the exact location of buried metal objects. Audio signal indicator and vibrator. Runs on 1 – 9-Volt Battery.
