Datasheet

12.19 ± 0.51
(.480 ± .020)
SOLDER LUG
TERMINAL
PC PIN
TERMINAL
THICKNESS
1.63 ± 0.38
(.064 ± .015)
.305 ± .003
(.012 ± .0001)
0.86
(.034)
3 PLCS.
3.30 ± 0.38
(.130 ± .015)
2.54
(.100)
3 PLCS.
12.19 ± 0.51
(.480 ± .020)
3590 - Precision Potentiometer
Panel Thickness Dimensions
(For Bushing Mount Only)
PANEL
POT
LOCKWASHER
HEX NUT
2.46 - 3.81
(.097 - .150)
1.60 +.08/-.03
(.063 +.003/-.001)
10.44 ± .07
(.411 ± .003)
DIA.
DIA.
ADDITIONAL HOLE FOR
ANTI-ROTATION PIN
Anti-rotation pin hole is shown at six o'clock
position for reference only. The actual location is
determined by the customer's application. Refer
to the front view of the potentiometer to see the
location of the optional A/R pin.
Panel thickness and hole diameters are
recommended for best fit. However, customers
may adjust the dimensions to suit their specific
application.
7.42
(.292)
R
Product Dimensions
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
REV. 06/12
2
1
3
BUSHING DIAMETER
(SEE PART NUMBERS)
SHAFT DIAMETER
(SEE PART NUMBERS)
12.70
(.500)
MOUNTING SURFACE
15.54
(.612)
5.08 ± .38
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
5.08 ± .38
(.200 ± .015)
10.31 + .00/- .13
(.406+.000/-.005)
.25
(.010)
1.19
(.047)
7.92
(.312)
.81
(.032)
20.62 ± .81
(.812 ± .032)
18.6 ± .4
(.732 ± .015)
12.2
(.48)
11.81
(.465)
DIA.
22.22 ± .38
(.875 ±.015)
DIA.
R MAX.
12.70 ±0.25
(.500 ± .010)
MOUNTING SURFACE
15.54
(.612)
12.2
(.480)
11.81
(.465)
DIA.
22.22 ± .38
(.875 ±.015)
DIA.
R MAX.
2
3
1
BUSHING DIA. (SEE
PART NUMBERS)
3/8-32
UNEF
.76 ± .25
.030 ± .010
SHAFT DIA. (SEE
PART NUMBERS)
5.08 ± .38
(.200 ± .015)
6.99 ± .38
(.275 ± .015)
10.31 +.00/-.10
(.406 +.000/-.004)
R
5.08 ± .38
(.200 ± .015)
.25
(.010)
7.93
(.312)
.81
(.032)
20.63 ± .81
(.812 ± .032)
.81 ± .25
(.032 ± .010)
18.59 ± .38
(.732 ± .015)
-2, -4, -6, -8 Confi gurations-1, -3, -5, -7 Confi gurations
Recommended PCB Layout
FMS
HOLE DIAMETER
2.08
(.082)
5.08
(.200)
5.08
(.200)
6.99
(.275)
Schematic
13
CCW CW
CW
2
TOLERANCES: EXCEPT WHERE NOTED
.508 .127
DECIMALS: .XX ±
(.02),
.XXX ±
(.005)
FRACTIONS: ±1/64
MM
DIMENSIONS:
(IN.)
Shaft & Bushing Confi gurations
(Bushing - DxL, Shaft - D):
(-1) Plastic Bushing (3/8 ” x 5/16 ”)
and Shaft (.2480 + .001, - .002)
(-2) Metal Bushing (3/8 ” x 5/16 ”)
and Shaft (.2497 + .0000, - .0009)
(-3) Sealed, Plastic Bushing (3/8 ” x 5/16 ”)
and Shaft (.2480 + .001, - .002)
(-4) Sealed, Metal Bushing (3/8 ” x 5/16 ”)
and Shaft (.2497 + .0000, - .0009)
(-5) Metric, Plastic Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .076 mm)
(-6) Metric, Metal Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .023 mm)
(-7) Metric, Sealed, Plastic Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .076 mm)
(-8) Metric, Sealed, Metal Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .023 mm)
Terminal Styles
“P” Terminal Style
“S” Terminal Style