Datasheet

Features
n RoHS compliant* and halogen free**
n Surface mount SMC package
n Standoff voltage: 5 to 170 volts
n Peak Pulse Power: 5000 watts
n Typical temperature coefficient:
DV
BR
= 0.1 % x VBR @ 25 °C x DT
Electrical Characteristics (@ T
A
= 25 °C Unless Otherwise Noted)
5.0SMDJ Transient Voltage Suppressor Diode Series
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Parameter Symbol Value Unit
Minimum Peak Pulse Power Dissipation (T
p
= 1 ms)
(Note 1,2)
P
PK
5000 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method)
(Note 3,4)
I
FSM
300 Amps
Steady State Power Dissipation @ TL = 50 °C P
M(AV)
6.5 Watts
Maximum Instantaneous Forward Voltage @ I
PP
= 100 A
(For Unidirectional Units Only)
V
F
5 Volts
Operating Temperature Range T
J
-55 to +150 °C
Storage Temperature Range T
STG
-55 to +150 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T
A
= 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.
General Information
Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly
higher power density circuit protection components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown
Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage.
Bourns
®
Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the at conguration
minimizes roll away.
How to Order
5.0SMDJ 12 CA - H
Package
5.0SMDJ = SMC/DO-214AB
Working Peak Reverse Voltage
12 = 12 V
RWM
(Volts)
Sufx
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Reel
(Blank) = 13-inch Reel
-H = 7-inch Reel
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
VERSIONS
AVAILABLE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
Asia-Pacic:
Tel: [phone]
Email: [e-mail]
Europe:
Tel: [phone]
Email: [e-mail]
The Americas:
Tel: [phone]
Email: [e-mail]
www.bourns.com