Datasheet

CMF-SDP Series - Telecom CPTC Resettable Fuses
Typical
Induction Rated Resistance Time to Trip
Voltage Rated Resistance Matching Hold Trip Imax @ @ Imax/
Model Withstand Voltage (RN) In Housing Current Current 230 VAC 230 VAC
VAC Volts Ohms Tolerance Ohms Amps @ 25 °C Amps @ 25 °C Amps Seconds
CMF-SDP07 600 230 7 ±20 % ±0.5 0.150 0.350 3.0 0.45
CMF-SDP10 600 230 10 ±20 % ±0.5 0.180 0.360 1.0 3.8
CMF-SDP10A 600 230 10 ±20 % ±0.5 0.150 0.360 1.0 3.8
CMF-SDP25 600 230 25 ±20 % ±0.5 0.130 0.260 2.8 0.2
CMF-SDP25A 600 230 25 ±20 % ±0.5 0.130 0.260 2.8 0.3
CMF-SDP35 600 230 35 +15/-20 % ±0.5 0.110 0.230 4.6 0.06
CMF-SDP35A 600 230 35 +15/-20 % ±0.5 0.110 0.230 4.6 0.04
CMF-SDP50 600 230 50 ±15 % ±0.5 0.090 0.190 2.5 0.13
CMF-SDP50A 600 230 50 ±15 % ±0.5 0.090 0.190 2.5 0.1
CMF-SDP75 600 230 75 ±20 % ±1 0.070 0.150 2.5 0.12
Electrical Characteristics
Features
■ Two resistance-matched PTCs in a
plastic housing
■ Narrow resistance tolerance
■ RoHS compliant*
Applications
Used as a secondary overcurrent protection
device in:
■ Customer Premise Equipment (CPE)
■ Central Office (CO)
■ Access equipment
*RoHS COMPLIANT
Operating Temperature Range: -40°C to +125 °C
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Primary
Test Protection Test Condition Requirements
Mains Power Contact - ITU-T K.20, K.21 ....None................230 V rms, 10 ohms, 15 Min.......................................................(Ri-Rf) / Ri < ±10 %
Power Induction - ITU-T K.20, K.21..............None................600V rms, 600 ohms, 0.2 seconds, 10 cycles, every 1 Min. ......(Ri-Rf) / Ri < ±10 %
Power Induction - ITU-T K.20, K.21..............GDT ................600 V rms, 600 ohms, 1 second, 10 cycles, every 1 Min. ..........(Ri-Rf) / Ri < ±10 %
Power Induction - ITU-T K.20, K.21..............GDT ................600 V rms, 200 ohms, 1 second, 10 cycles, every 1 Min. ..........(Ri-Rf) / Ri < ±10 %
Lightning Surge - ITU-T K.20, K.21 ......................................10/700 µs, 25 ohms, 1.0 kV, 10 Tests, every 1 Min. ..................(Ri-Rf) / Ri < ±10 %
Lightning Surge......................................................................10/100 µs, 25 ohms, 1.5 kV, 30 Tests, every 3 Min. ..................(Ri-Rf) / Ri < ±10 %
Ri = R initial
Rf = R final
Test Procedures And Requirements For Model CMF-SDP Series
How to Order
CMF - SD P 35 A -XX - 2
Product Designator
Style
SD = Surface Mount
Dual Pkg.
Housing
P = Plastic
Rated Resistance (RN)
7-75 (7-75 Ohms)
Footprint and Height Option
Blank = Standard Product
A = Reduced Footprint and Height
Resistance Tolerance Option
Blank = Standard
-XX = XX %; e.g. -10 = ±10 %
Packaging Options
- 2 = Tape & Reel
Typical Part Marking
Represents total content. Layout may vary.
35P8G
MANUFACTURER'S
TRADEMARK
PART
IDENTIFICATION:
07P = CMF-SDP07
10P = CMF-SDP10
10PA = CMF-SDP10A
25P = CMF-SDP25
25PA = CMF-SDP25A
35P = CMF-SDP35
35PA = CMF-SDP35A
50P = CMF-SDP50
50PA = CMF-SDP50A
75P = CMF-SDP75
YEAR CODE:
8 = 2008
BI-WEEKLY
DATE CODE:
WEEK 13-14 = G
Asia-Pacific:
Tel: [phone]
Fax: [phone]
Europe:
Tel: [phone]
Fax: [phone]
The Americas:
Tel: [phone]
Fax: [phone]
www.bourns.com