Datasheet

Specifications are subject to change without notice.Specifications are subject to change without notice.
33
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
IEC EIA
Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Carrier tape width W W
Hold down tape width W4 min.
Hold down tape W0 No protrusion
Top distance between tape edges W2 W6 max.
Sprocket hole position W1 W5
Sprocket hole diameter D0 D0
Abscissa to plane (straight lead) H H
Abscissa to plane (kinked lead) H0 H0
Abscissa to top H1 H1 max.
Overall width w/lead protrusion C1 max.
Overall width w/o lead protrusion C2 max.
Lead protrusion I1 L1 max.
Protrusion of cutout L L max.
Protrusion beyond hold tape I2 I2 Not specified
Sprocket hole pitch P0 P0
Pitch tolerance 20 seconds ± 1 second
Device pitch: MF-R010 – MF-R160
Device pitch: MF-R185 – MF-R400
Device pitch: MF-RX110 – MF-RX160
Device pitch: MF-RX185 – MF-RX375
Tape thickness t t max.
Tape thickness with splice t1 max.
Splice sprocket hole alignment 0
Body lateral deviation ∆ h ∆ h 0
Body tape plane deviation ∆ p ∆ p 0
Lead seating plane deviation ∆ P1 P1 0
Lead spacing F F
Reel width w w max.
Reel diameter d a max.
Space between flanges less device
Arbor hole diameter f c
Core diameter h n max.
Box max.
Consecutive missing places 3 maximum
Empty places per reel Not specified
MF-R and MF-RX Series Tape and Reel Specifications
Tape and Reel Specifications
18
(.709)
-0.5/+1.0
(-0.02/+.039)
9
(.354)
-0.5/+0.75
(-0.02/+0.03)
4
(.157)
±0.2
(±.0078)
18.5
(.728)
±3.0
(±.118)
16
(.63)
32.2
(1.268)
43.2
(1.7)
42.5
(1.673)
1.0
(.039)
11
(.433)
±0.5
(±.02)
12.7
(0.5)
12.7
(0.5)
12.7
(0.5)
25.4
(1.0)
25.4
(1.0)
0.9
(.035)
2.0
(.079)
5.08
(0.2)
56
(2.205)
370
(14.57)
±0.3
(±.012)
±0.3
(±.012)
±1.0
(±.039)
±1.3
(±.051)
±0.7
(±.028)
±0.8
(±.035)
4.75
(.187)
±3.25
(±.128)
26
(1.024)
80
(3.15)
56
(2.2)
372
(14.6)
372
(14.6)
±12.0
(±.472)
5
(.197)
3
(.118)
DIMENSIONS =
MM
(INCHES)