Datasheet

Features
■ Shielded construction
■ Metal alloy powder core
■ High saturation current
■ Flat wire
■ AEC-Q200 compliant
■ RoHS compliant* and halogen free**
SRP6060FA Series – Shielded Power Inductors
Operating Temperature
................................-55 °C to +155 °C
(Temperature rise included)
Storage Temperature (Component)
................................-55 °C to +155 °C
Rated Current ............. Inductance drops
30 % at Isat
Temperature Rise .................20 or 40 °C
at rated Irms
1
MSL ......................................................1
................. N/A
Note 1: Circuit design, component, PCB trace size
and thickness, airflow and other cooling provisions all
affect the part temperature. Part temperature should be
verified in the end application.
Core ..........................Metal alloy powder
Wire ............................Enameled copper
Terminal Finish ...................................Sn
Packaging ....... 750 pcs. per 13-inch reel
Materials
SchematicHow to Order
SRP6060FA - 100M
Model
Value Code (see table)
EMEA:
The Americas:
www.bourns.com
100
1632
6.6 ± 0.2
(.260 ± .010)
5.8 ± 0.2
(.228 ± .008)
1.4 ± 0.2
(.055 ± .008)
6.4 ± 0.2
(.252 ± .010)
2.6 ± 0.25
(.102 ± .010)
5.3 ± 0.3
(.209 ± .012)
Product Dimensions
5.6
(.220)
5.6
(.220)
2.5
(.098)
DIMENSIONS:
MM
(INCHES)
DIMENSIONS:
MM
(INCHES)
Recommended Layout
*RoHS COMPLIANT,
**HALOGEN FREE &
AEC-Q200 COMPLIANT
150
1742
Bourns
Part Number
Inductance
@ 100 kHz / 1 V
SRF
(MHz)
Typ.
DCR
(mΩ)
Typ.
DCR
(mΩ)
Max.
I rms (A)
Typ.
I sat
(A)
Typ.L (μH) Tol. %
20 °C
Temp. Rise
40 °C
Temp. Rise
SRP6060FA-4R7M 4.70 ± 20 % 24 13.1 14.4 8.0 11.0 10.5
SRP6060FA-5R6M 5.60 ± 20 % 18 14.3 15.8 7.5 10.0 10.0
SRP6060FA-6R8M 6.80 ± 20 % 16 18.9 20.8 7.0 9.0 9.2
SRP6060FA-8R2M 8.20 ± 20 % 14 22.5 24.8 6.0 8.0 8.5
SRP6060FA-100M 10.0 ± 20 % 12 26.6 29.3 5.0 7.0 7.6
SRP6060FA-150M 15.0 ± 20 % 11 39.0 43.0 4.5 6.0 5.8
SRP6060FA-220M 22.0 ± 20 % 10 55.0 60.5 3.8 5.0 5.6
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns follows the prevailing defi nition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;
(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov