- Bowe, Bell & Howell Scanner User Manual

42
Remove the paper feed roller module, holding up the paper feed case along the groove of the feed cover
to pull the claw out of the case.
Install the new paper feed roller module with its gear on the right.
• Hang both ends of the paper feed roller module.
• While slightly lifting the paper feed roller module, pass the claw along the groove of the feed cover.
• Attach the bearings at both ends of the paper feed roller module into the guide grooves of the chassis.
4
5
A – Claw
B – Groove
C – Paper Feed
Case
A – Chassis
B – Bearings
C – Green Levers