- Bowe, Bell & Howell Photo Scanner User Manual
Table Of Contents
- Trademark Acknowledgments
- Table of Contents
- Thank You
- Specifications
- Advanced Features
- Safety Precautions for the Operating Environment
- Installing the Scanner
- Operating the Scanner
- Operator Maintenance
- Cleaning the Outside of the Scanner
- Cleaning Inside the Scanner
- Roller Cleaning Paper
- Cleaning the Paper Feed Roller, Separation Roller and Retard Roller
- Cleaning the Drive Rollers and Free Rollers in the ADF
- Cleaning the Drive Rollers, Free Rollers and Exit Rollers in the Exit Door
- Cleaning the Background Color Reference Plates and ADF Glass
- Cleaning the Paper Sensor, Waiting Sensors and Double Feed Detector
- Cleaning the Starting, Skew and Ending Sensors
- Replacing Consumables
- Trûper User Utility
- Troubleshooting
- Repacking Instructions
- Glossary
- Appendix 1-Front Page, Pre-Scan Imprinter Installation
- Appendix 2-Multicolor Dropout (MCD) and Single Color Dropout
- Appendix 3-Shading Adjustment
- Appendix 4-Adding Memory
- Appendix 5 - Wire Frame Accessory
- Index
- Limited Use License Agreement
www.bbhscanners.com 106 of 142
Repacking Instructions
If you need to transport or ship the scanner, please follow these guidelines and instructions:
• Use the original scanner carton and packing materials. You will also need shipping tape and
scissors.
• Improper repacking of the scanner may cause damage during handling and shipment.
• The scanner should always be handled in the horizontal position.
Press the power button to the OFF position. Disconnect the
scanner from the electrical outlet and disconnect the
interface cable.
Remove the feeder tray at points (1) and (2). (See page 25
.)
Wrap the tray with protective sheets of plastic. Seal the plastic with tape. Fold down the exit
stopper.
Pack the scanner in the original carton and packing materials. Note the packing arrangement in the
diagram.
1
Exit stopper
Remove the feeder tray
1
2
2
3
CD-ROM with
Operator Manual, VRS
and driver software
Roller cleaning paper
(3 pieces)
Shading paper
Blower
USB 2.0 cable
Feeder tray
Power cord