Wi-Fi 6 MESH AP Quick Start Guide Azores Networks, LLC
Overview Thank you for choosing our product. Please read this manual before use. If you need to change Internet Access method,i.e.from router to bridge mode,or add a new Mesh AP to your Mesh network,or need other information,please scan the QR code below or visit https://azoresnetworks.com/pages/download-center in the browser to view the corresponding electronic user manual for instructions.
01 Product Hardware Description Product Backside Description AX1500 AX1800 AX1500/AX1800 AX1800 PRO/AX3000 PRO The picture is for reference only, please refer to the actual product. Button Description Button WPS Function Set the WPS process. Short press (1 second) for reset the router; Reset Long press (5 seconds or longer) for reset to factory default settings. ON/OFF Power on and off the router.
Turn on or off the LED.Turn off the LED indicator for a better sleep. LED ON/OFF The LED indicator switch will not affect the operation of Azores Router.
Mesh Router Set AX1500/AX1800 AX1800 PRO/AX3000 PRO For mesh router set: Main AP has the QR code on the label, is used as the main router, which is to be connected, via provided network cable, to your home Broadband Gateway (i.e. cable/DSL modem, PON gateway); Satellite AP is used for Wi-Fi network expansion. Please refer to ONE ROUTER SETUP STEPS (for Main AP) & MESH SETUP STEPS (for Satellite AP) for network setup.
must be connected to the WAN Port of Azores Router. When it is connected to the Internet ,the LED light is steady green. If you can, try place the Azores Router in an open area like on a table or a shelf. Wired devices can be connected directly to LAN Port(s) for Internet access; Wireless devices can use the network name (SSID) & password (see the sticker on the bottom(or backside) of Azores Router) to connect to Internet.
Scan QR code to download Azores Router APP 03 Follow the APP guidance to log in. 04 Enter the “My Wi-Fi” menu to modify WiFi configuration or perform other operations. *Note: If you want to use the mobile device to perform other operations on the router, follow the instructions on the mobile APP.
06 Frequently Asked Questions Q1 I replaced my old router with Azores (2) If PPPoE Internet access is needed, you need Router.After connecting network cable to check whether the broadband account and from DSL/PON/Cable gateway to the password are filled in correctly;Otherwise, check Azores Router, the LED is keep flashing whether the Internet status of your Broadband red.What should I do? Gateway is normal.
、Answer:Try put Router in bridge mode.Please scan the QR code(on page 1) to view the electronic user manual to switch to bridge mode. Q7 What if I already purchased a Mesh Router set and want to further expand the network with additional AP(s)? Answer:You need to purchase another or more Azores routers(the same model) and expand the current mesh network.Please scan the QR code to view the electronic user manual to obtain the customized mesh network operation method.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISED Canada Statement: This device contains licence-exempt trasnsmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada 's licence-exempt RSS(s). Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device.