User Manual
User Options
User Menu
Use the MENU button to access various settings to allow function customisation of the unit.
Review and Adjustment
1. Select the required option by pressing the MENU button. Hold the MENU button down
to advance quickly through the options.
2. Release the button when the desired option is displayed.
3. The displayed option will be shown alternating with its value.
4. Review or change the option value as required by using the Rotary Control. The value will
remain displayed while being changed.
5. If no adjustment is made for approximately 10 seconds the menu mode will exit
automatically. Alternatively, press and release the TEST button to exit immediately. In
both cases any changes made will be saved.
6. While in options mode the MODELLING, READY, SYNC and TEST functions are
disabled from their normal operation in order to prevent inadvertent changes being
made.
The following table is a summary of the options available:
14
XMS user guide
User Options
Bowens.co.uk
OPTION
Pairing
Remote Channel
Remote Group
Pre-Flash Number
Pre-Flash Time
Pre-Flash Delay
Audible Ready Period
Sounder Function
Lamp Saver
Battery Saver
Power Switch State
Options Defaults
DISPLAY
Pr
Ch
Gr
Pn
Pt
Pd
Au
So
LS
bS
PS
dF
VALUES
nP = New Pair
UP = Un-Pair
CP = Clear ALL Pairs
1 to 16
1 to 9
0.5 or 1 to 8 seconds.
0 to 15ms
15 to 90 x 10 (150ms to 900ms in 50ms steps)
1 = Warnings only
2 = Button clicks only
3 = Warnings and button clicks
0 = Do not save, 1 = Save
0 = Keep current settings, 1 = Set defaults (does
DEFAULT
nP
1
1
1
2.0
2
35
0
0
0
0
0