User Manual

5
XMS user guide
Safety Instructions
WARNING - Electrical Shock Hazard - High Voltage!
• This unit should only be connected to a mains socket outlet with a protective
earth connection or to a suitably protected battery/mains inverter.
• Only use Bowens mains cables or extension cables.
• The mains cable and plug is regarded as an emergency disconnect device
and should always be readily accessible so that it can be quickly removed.
• Do not open or disassemble the unit as it operates with a high voltage and
contains capacitors that can remain electrically charged for a considerable
  
 
   
Safety Precautions
• Always study and understand this user guide and accompanying safety
instructions before using this unit.
• Make sure that the Bowens User Guide and Safety Instructions always
accompany this unit.
• Bowens products are intended for professional photographic use only
and should not be used for any other purpose.
• Always remove the protective cap from the unit before use.
• Do not point the unit too close to persons.
• Do not use the modelling lamp if it is damaged or deformed.
• When replacing a modelling lamp avoid touching the bulb with bare hands,
use a clean tissue or cloth.
 
and certain metal parts can become very hot. Allow the unit to cool before
touching any user changeable parts.
• Ensure that the modelling lamp voltage and power rating corresponds with
  
safely used but the voltage must always be correct for the power supply
being used.
 
competent service personnel.
Safety Instructions
Bowens.co.uk