Specifications

Pulsar radio trigger system
20 - Remote Ttriggering | Pulsar Radio Trigger System
Pulsar (Transceiver)
Whether you are triggering flash heads
for complicated lighting setups or
cameras for remote control nature shots
or special effects, this system is for you.
Each Pulsar unit can be either a transmitter or
receiver and is capable of sending or
receiving signals beyond 100m [333’].
Unlike Infrared triggering systems, the radio-
transmitted Pulsar operates around corners
and through walls.
The Pulsar has four separate channels,
enabling you to isolate up to four light
sources or to combine them and fire all of
them at once without leaving the camera.
The Pulsar also has a studio selector switch,
providing isolation from other units using the
same channel, allowing up to six systems to
operate independently in the same space.
BW5160 - Pulsar Twin Pack
BW5150 - Pulsar Single Unit
Pulsar Tx Unit (Transmitter)
This ultra-compact transmitter with its
camera-hugging low profile ensures you can
shoot comfortably without your camera
becoming unbalanced by unwieldy
attachments.
The Pulsar Tx features a unique ‘click-lock’
system for attaching the unit to your camera
hotshoe securely without the need for
tightening via a thumbscrew. The ‘click-lock’
holds the trigger firmly in place whether the
camera is being used in landscape or portrait
position.
Weighing in at just 34g, it is powered by a
single CR2032 battery, and the power
management system ensures long battery
life.
Functionality couldn’t be easier! The Tx is
controlled by two simple push buttons
allowing full control over the 24 radio zones.
Channel and studio selections are indicated
by a row of LED’s.
BW3965 Pulsar Tx Unit.
BW3967 Pulsar Tx Unit with Rx Card.
21 - Remote Triggering | Wireless
Integrated radio triggering.
Easy as one... two... three...
one.
Insert trigger card.
two.
Attach antenna.
free..!
from sync cords.
Specifications:
Length: 55mm [2
1
⁄4”]
Width: 40mm [1
5
⁄8”]
Height: 40mm [1
5
⁄8”]
Weight: 34g [1.2oz]
Pulsar Rx Card Set (Receiver)
Gemini Classic, R & Pro monolights can become compatible
with the Pulsar system by using this unique upgrade pack.
Simply insert the Radio Trigger Card into the slot on the back
of the Gemini unit then fit the antenna into the socket on the
side and your monolight is ready to receive signals from a
Pulsar unit mounted onto your camera.
Never be let down by unreliable sync cords or connections
again.
BW5170 Rx Card & Antenna Set.
BW3967 Rx Card Set with Pulsar Tx Unit.
Gemini R & Pro Remote Control
The pocket-sized Gemini Remote Control makes working
with Gemini ‘R’ and ‘Pro’ monolights (or our Jetstream Wind
machines) a breeze.
Weighing in at just 34g this diminutive device allows
photographers precise control of features such as power, test
flash, modelling, sounder, photocell and channel setting
without ever leaving the camera position - up to seven meters
(22’) away.
BW3960 Gemini R & Pro Remote Control.
Specifications
Length: 95mm [3
6
⁄8”]
Width: 45mm [1
6
⁄8”]
Height: 10mm [
3
⁄8”]
Weight: 34g [1.2oz]
Specifications:
Length - 90mm [3
1
⁄2”]
Width - 49mm [2”]
Height - 44mm [1
3
⁄4”]
Weight - 122g [4.3oz]
Tx/Rx Select
n
Channel Select
n
Sync In
n
External Power
n
Test Flash
n
n
LED Indicator
n
PC Sync. Out
n
Hot Shoe
n
Sync. Out
n
Studio Select
Pulsar Tx/Rx Set (Trigger Unit & Receiver Card)
Gemini Classic, R & Pro monolights can become compatible
with the Pulsar system by using this unique upgrade pack.
Simply insert the Radio Trigger Card into the slot on the back
of the Gemini unit then fit the antenna into the socket on the
side and your monolight is ready to receive signals from a
Pulsar unit mounted onto your camera.
Never be let down by unreliable sync cords or connections
again.
BW5170 Rx Card & Antenna Set.
BW3967 Rx Card Set with Pulsar Tx Unit.