Specifications

38 - Light Modifiers | Effects Reflectors
effects reflectors
39 - Light Modifiers | Effects Reflectors
With its 20 x 30.5cm (8 x 12") elliptical shape, this reflector
produces an oval pool of light that can be used to create a
natural vignette on a background or other areas. Two spring
clips allow coloured gels to be fitted.
BW2560 backlite reflector
BW2552 set of 12 coloured gels for backlite
This is a good general-purpose direct reflector with an even
coverage and a high light output. Since it has a small 20cm
(8") diameter, the light it produces is moderately high in
contrast. The stippled surface ensures a smooth and even
light distribution.
BW1887
This handy accessory for the 65º Maxilite reflector simply
clips to the front allowing you to use coloured gels and filters
for added creativity.
BW2368 Gel/filter holder for Maxilite
BW2364 Set of 12 coloured gels & filters
For creating a simple spot effect, this 10cm (4”) cone can also
be used as a hair light, creating a pool of illumination on the
hair without spilling on to the face or background.
BW1888 snoot
BW1862
1
⁄4” honeycomb grid for snoot
These grids fit on to the front of the Maxilite Reflector and
deliver a very tightly controlled pool of illumination, creating a
highly efficient spot effect.
BW1891
3
/8” (9.525mm) grid for a wider angle spot effect.
BW1892
1
/4” (6.35mm) grid for a narrower angle spot.
Another useful add-on for the 65º Maxilite reflector. The four-
leaf barn-doors allow a greater degree of control over the light
spread.
This attachment also incorporates a gel holder allowing the
use of the BW2364 gel set for creative lighting.
BW2363
15º snoot honeycomb grids (for maxilite) barn-door & gel holder (for maxilite)
backlite reflector 65º maxilite reflector gel filter holder (for maxilite)
Exceptional value-for-money starter kit containing a reflector,
snoot and four-leaf barn door. The efficient 60° reflector is
optimised for light spread. The snoot and barn door
attachments connect neatly onto the main reflector, providing
instant control.
BW1882 basic reflector set
BW1057 set of coloured gels for reflector kit
These are a must for anyone using direct reflectors.
Simply clip to the rim of your reflector to enable the spread of
light to be precisely controlled.
BW1869 clip-on barn-doors
(reflector not included)
Keep your studio tidy and your reflectors protected with this
useful ‘S’-type wall mount. Simply attach to a wall and fit
your reflector to it in the same way you would to a flash head.
A neat a low cost solution to reflector storage.
BC120 Reflector Wall Mount.
These are designed to fit a wide range of Bowens reflectors.
The adjustable fittings clip over the rim of the reflector.
BW1861A
1
⁄4” (6.35mm) grid for a narrower angle spot effect.
BW1861B
3
⁄8” (9.525mm) grid for a wider angle spot effect.
The multiclip has thousands of uses around the studio. This
unique double-ended, swivel-mounted clip can be used for
holding diffusers, filters or gobos to light units or for holding
reflector cards between your light-source and lens. A ‘must-
have’ for all photographers,
BW1826/A multiclip
NOTE:
All Bowens direct attachment reflectors feature the standard
‘S’-type fitting which means they are compatible with all
Bowens monolights and generator flash-heads.
universal honeycomb grid multiclip
basic reflector kit universal clip-on barn-doors ‘S’-type studio wall mount