Specifications

For heavier items, the Six Wheel Carriage
ensures smooth operation.
BW2628 Six-Wheel Single Carriage [410g]
Six-Wheel Single Carriage
The Double Carriage with Brake will stay
locked in position and should be used at
least one per rail to rail connection to ensure
rails stay in their desired position.
BW2620 Braked Double Carriage [400g]
The Double Carriage allows two rails to be
attached while still allowing full movement
between them.
BW2603 Double Carriage [392g]
A braked version of the smooth running Six-
Wheel Carriage ensures that your lights stay
in their set position.
BW2648 Braked 6-Wheel Carriage [600g]
hi-glide system
(Carriages)
Double Carriage
The Single Carriage allows equipment to be
attached to the rails.
BW2604 Short Fixing Bracket [400g]
Single CarriageDouble Carriage with Brake
Six-Wheel Single Carriage
with Brake
This specially designed carriage can be
subsequently added to the rail without
removing the rail end stops.
BW2660 Addalite Carriage [399g]
Addalite Carriage
Cable Transfer Runners carry the cable
along the rails. (pack of five)
BW2607 Cable Transfer Runners [130g]
Cable Transfer Runners
This transports cables along the top of the
rail rather than hanging beneath.
BW2681 Top Cable Carriage [175g]
Top-Running Cable Carriage
78 - Hi-Glide Rail System | Carriages
The short LiteLift has a minimum extension of 28cm and has
a maximum of 121cm and is designed for lower ceiling
heights. Supplied with two compensator springs, safety
cable and spring removal key.
BW2608/S Short Litelift [3.4kg]
Short Litelift Pantograph
Extension Tubes connect directly to the 5/8th spigot on
carriages or below the Litelift for longer drops.
BW2615 30cm Extension Tube [400g]
BW2616 60cm Extension Tube [600g]
BW2617 90cm Extension Tube [1kg]
The LiteLift extends from 34cm (minimum) to 189cm
(maximum) and includes two compensator springs, safety
cable and a spring removal key.
BW2608 Standard Litelift [4.4kg]
Springs ensure that the Litelifts hold their desired
position. Higher numbered springs support greater
weights. Springs can be used individually or in pairs.
BW2610 Type 1 Spring [200g]
BW2611 Type 2 Spring [400g]
BW2612 Type 3 Spring [400g]
BW2613 Type 4 Spring [400g]
hi-glide system
(Pantographs & Accessories)
Extension Tubes
Pantograph Springs
Which Springs to use:
The type of spring you will need to combine with the Litelift
pantograph will depend on the weight of the equipment
you are attaching to it.
Use this table to ensure you have the correct spring
combination to safely support your equipment.
You can use up to four springs on each Litelift pantograph.
Example:
If the lighting equipment you are attaching to the Litelift
weighs 15.4kg.
You would need to use two ‘Type 4’ springs (9.0 - 10.0kg)
and two ‘Type 2’ springs (5.4 - 7.3kg).
Weight (kg) Spring Combination
1.8 - 2.7kg 1 of Type 2
2.7 - 3.6kg 2 of Type 1
3.6 - 5.4kg 1 of Type 1 & 1 of Type 2
5.4 - 7.3kg 2 of Type 2
7.3 - 8.2kg 1 of Type 3 & 1 of Type 2
8.2 - 9.0kg 1 of Type 3 & 1 of Type 4
9.0 - 10.0kg 2 of Type 4
18 - 20.0kg 4 of Type 4
79 - Hi-Glide System | Pantographs & Accessories
Standard Litelift Pantograph