User Manual

For more information visit www.moore-and-wright.com Partners in Precision
DIGITRONIC MICROMETER INSTRUCTIONS
Digitronic Micrometer 201 Series
Please carefully review these instructions to ensure proper and accurate use of your new Digitronic Micrometer.
Features
1. Frame
2. Anvil
3. Spindle
4. Locking device
5. Thimble
6. Frame insulator
7. Function buttons
8. LCD display
9. SPC output
LCD Display
in: Inch measuring mode
mm: Metric measuring mode
INC: Relative measuring mode
ABS: No symbol present
Operation
• Keys are pressed two ways to execute functions:
1. Press and immediately release
2. Press and hold for at least two seconds
On/Off - Zero Key
• Press and release: Power on/off
• Press and hold: Zero set for absolute measuring ("Set" will appear)
ABS/INC - Unit Key
• Press and release: Absolute and INC measuring mode conversion
• Press and hold: Inch/Metric conversion ("in" will appear for inch readings, "mm" will
appear for metric readings)
Data Output
In measuring mode, this is the data output key
• Press and release: The micrometer will output the displayed data
• Press and hold: The micrometer will output the displayed data continually until the button
is pressed again
1
6
7
8
9
2 3
4
5
MW201-01DAB_Manual_A4.indd 1 08/05/2012 10:03