Product Datasheet/Brochure

CDA-16

Distribution

Ampliﬁer

Compact powerhouse.

Offering 16 channels of power, the CDA-16 can enable

your whole home with sound yet takes up minimal space

thanks to its compact 1U design.

CDA-16 has been engineered to work with any existing Bowers & Wilkins

custom installation speaker. With the ability to drive 16 channels or 8 zones

in a compact 1U design, CDA-16 gives you the maximum performance with

the minimum rack space.

The power to impress.

Ensure the best possible sound from your in-wall or

in-ceiling Custom Installation loudspeakers with our

powerful yet compact distribution ampliﬁer.

Mighty ﬂexible.

CDA-16 has a conﬁgurable speciﬁcation supporting

bridging of its Class D stereo channels into even more

powerful mono outputs when needed.

PAGE 1
CDA-16 Distribution Amplifier CDA-16 has been engineered to work with any existing Bowers & Wilkins custom installation speaker. With the ability to drive 16 channels or 8 zones in a compact 1U design, CDA-16 gives you the maximum performance with the minimum rack space. The power to impress. Ensure the best possible sound from your in-wall or in-ceiling Custom Installation loudspeakers with our powerful yet compact distribution amplifier. Compact powerhouse.
PAGE 2
CDA-16 Audio Specifications Load impedance range: >3Ω per channel (>6Ω in bridge mode) Output Power per channel, non-clipped: Output Power bridge mode, non-clipped: Output Power total, all channels: >50W into 8Ω >100W into 4Ω >200W into 8Ω DC offset voltage: <50mV Frequency Response (-3dB): <10Hz to >50kHz, any load impedance >400W short term >200W continuous average Frequency response accuracy ±0.5dB 20Hz-20kHz: Signal to Noise ratio >100dB A-Weighted (Ref. 50W/8Ω): THD+N (1kHz, 12.