Specifications

Custom Installation
CI 300
Speakers from Bowers & Wilkins have always been recognised as delivering the best audio
experience at any level. Techniques and materials honed to perfection in our core models
have been successfully carried over to our custom products, so that those who want to hear
everything whilst seeing nothing have had a clear solution. That is unless the environment is one
of high humidity, such as a shower room or indoor swimming pool, which are unsuited to some
of the advanced materials we have employed.
All change!
The three models in the new CI 300 Series have been specically designed to cope with these
more demanding environments, so whereas their cost effectiveness may lead them to being
described as entry level, they also provide a point of entry to areas of the home that were
previously off-limits for high-quality installation loudspeakers.
CWM362
The CWM362 is a two-way in-wall loudspeaker. Like the in-ceiling models in the series, it
features an elegant minimal-width border design.
Affordable, high-quality audio everywhere.
CWM362 Technical Specications
2-way in-wall system
1x 160mm (6in) Polypropylene cone bass/midrange
1x 25mm (1in) soft dome tweeter
50Hz - 30kHz
89dB
8Ω (5.0Ω)
80W
PMK W6
BB 6W
Description
Drive Units
Frequency Range (-6dB)
Sensitivity SPL (2.83V, 1m)
Impedance Nominal (min)
Power Handling
Pre-mount Kit
Back Box
181mm (7.2in)
315mm (12.4in)
221mm (8.7in)
275mm (10.9in)
76mm (3in)