English CWM6
Welcome to Bowers & Wilkins and the CWM6 Series Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
1. CWM6 Carton Contents 2. CWM6 Series Basics CWM663, CWM664 CWM652 183mm (7.
3. Positioning CWM6 Series Speakers The appropriate position for CWM6 Series speakers within the listening environment will depend on their specific application: General Background Audio Applications: For applications where single CWM6 Series speakers are required to operate independently to provide background audio, they can be located substantially as installation convenience and architecture dictate.
4.2 If speaker cable is already present in the wall space, pull the cable down through the aperture. If speaker cables are not already installed this should be done at this stage. It is likely that you will need to gain access through the floor above to route the cables down into the wall cavity. Leave enough spare cable through the aperture to ease connection to the speaker frame, but not so much that it is likely to buzz or rattle when pushed back up into the wall space. Approximately 1.
= 1x 4.6 The baffle can now be fitted into the frame. Ensure that the connector on the baffle is oriented correctly with the connector in the frame. The baffle is hinged into place along its bottom edge and secured at the top by two push-lock fasteners. Push-lock fasteners are secured by pushing the head inwards – either with a thumb or a screwdriver. Please ensure that the largest groove on the fastener is orientated at a diagonal, pointing to the corner of the baffle, before pushing the fastener.
4.8 The grille can now be fitted to the baffle. It is held in place magnetically, so simply needs to be aligned with the groove in the frame flange, where it will click into place. The diagram above illustrates fitting the grille. The CWM6 Series speaker is now installed and ready for use.
Issue 2 B&W Group Ltd Dale Road Worthing West Sussex BN11 2BH England T +44 (0) 1903 221 800 F +44 (0) 1903 221 801 info@bwgroup.com www.bowers-wilkins.com B&W Group (UK Sales) T +44 (0) 1903 221 500 E uksales@bwgroup.com B&W Group North America T +1 978 664 2870 E marketing@bwgroupusa.com B&W Group Asia Ltd T +852 3 472 9300 E info@bwgroup.hk Copyright © B&W Group Ltd.