Spec Sheet

Custom Installation

Marine 6

See nothing, hear everything

The marine environment is unforgiving. Any equipment has to survive

extremes of temperature, salt spray and hosing down. It’s little wonder

then that most speakers designed for marine applications sacrice

sound quality for ruggedness.

Of course, any Bowers & Wilkins speaker must sound brilliant. So these

marine speakers were rst designed to match exacting sound quality

standards, then the necessary toughness to survive the harsh marine

environment was added. Both models boast IP66 ratings when properly

installed, and the metal grille and all screws are marine-grade stainless

steel. The driver chassis uses a non-corroding rigid polymer and the

tweeter dome has a rear support to prevent permanent deformation

when hosed down.

Marine 6 and Marine 8 are super-tough to deal with the most

demanding installation environments, with Bowers & Wilkins superior,

uncompromising audio quality.

Technical Specications

Description 2-way system

Drive Units 1x Ø25mm (1 in) soft dome tweeter

1x Ø150mm (6 in) polypropylene cone

bass/midrange

Frequency range (-6dB) 43Hz – 26kHz

Recommended 20W – 80W

Amplier Power

Sensitivity 88dB (2.83V, 1m)

Nominal Impedance 8Ω (4Ω minimum)

Outer diameter Ø243mm (9.6 in)

Cut-out diameter Ø202mm (8 in)

Depth behind surface

88mm (3.5 in)

Protrusion 8mm (0.3 in)

Net weight 1.4kg (3.1 lb)

Pre-mount Kit PMK C6

www.bowers-wilkins.com

This information is intended as a guide only and reects the current specication at the time of print.

We reserve the right to make changes to the specications.