606 607 Manual
Welcome and thank you for choosing Bowers & Wilkins. Our founder, John Bowers, believed that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and inspires every product we design. This is a high performance product that rewards thoughtful installation, so we suggest that you take some time to read this manual before you begin.
Hoş geldiniz ve Bowers & Wilkins’ı seçtiğiniz için teşekkür ederiz. Kurucumuz John Bowers, yaratıcı tasarımının, yenilikçi mühendisliğin ve ilerici teknolojinin, evde sesin keyfini çıkarmanın kilidini açacak anahtarlar olduğuna inanıyordu. O’nun inancını paylaşmayı sürdürmekteyiz ve bu inanç, tasarladığımız her ürüne ilham vermektedir. Bu, dikkatli kurulum gerektiren yüksek performanslı bir üründür, bu nedenle başlamadan önce bu kılavuzu okumaya zaman ayırmanızı öneririz.
Carton Contents Check in the carton for: 2 Foam plug 8 Self-adhesive rubber supporting feet Environmental Information This product complies with international directives, including but not limited to: i. the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, ii. the Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) iii. the disposal of Waste Electrical and Electronic Equipment (WEEE). ENGLISH 1.
ENGLISH 2. Positioning 5 Channels >0.5m 7 Channels >0.5m 1.5m - 3m >0.5m 110° - 130° ~40° Speaker Positioning Adjustment of speaker position following initial installation will probably further improve the sound quality and is usually worthwhile. In either stereo or home theatre installations, try to ensure that the immediate surroundings of each speaker are similar in acoustic character.
All connections should be made with the audio equipment switched off. There are 2 linked pairs of terminals on the back of the speaker. For conventional connection (above left), the terminal links should remain in place (as delivered) and just one pair of terminals connected to the amplifier. For bi-wire connections or bi-amplification (above right), the terminal links should be removed and each pair of terminals connected to the amplifier or amplifiers independently.
ENGLISH 4. Fine Tuning Before fine tuning, make sure that all the connections in the installation are correct and secure. Moving the speakers further from the walls will generally reduce the volume of bass. Space behind the speakers will also help to create an aural impression of depth. Conversely, moving the speakers closer to the walls will increase the volume of bass.
6. Aftercare The performance of the speaker will change subtly during the initial listening period. If the speaker has been stored in a cold environment, the damping compounds and suspension materials of the drive units will take some time to recover their correct mechanical properties. The drive unit suspensions will also loosen up during the first hours of use. The time taken for the speaker to achieve its intended performance will vary depending on previous storage conditions and how it is used.
II15296 Issue 1 B&W Group Ltd Dale Road Worthing West Sussex BN11 2BH England T +44 (0) 1903 221 800 F +44 (0) 1903 221 801 info@bwgroup.com www.bowers-wilkins.com B&W Group (UK Sales) T +44 (0) 1903 221 500 E uksales@bwgroup.com B&W Group North America T +1 978 664 2870 E marketing@bwgroupusa.com B&W Group Asia Ltd T +852 3 472 9300 E info@bwgroup.hk Copyright © B&W Group Ltd.
