Owner's Manual

7
ENGLISH
Bluetoot
h Codec
Bluetooth Profiles
Fr
equency Band
RF output power
Bluetooth Codec
Dr
ive Units
Bat
tery
Life
Fr
equen
cy Range
Inp
ut Impedance
Disto
rtion (THD)
Ch
arging
Inputs
12. S
p
e
cifications
Technical Features
True Wireless techonlogy
Bluetooth 5.0 with AptX Adaptive technology
Auto ANC
Audio streming from charge case
Wir
eless and USB-C charging
Fast charging support
AptX – Adaptive
AptX – HD
AptX – Low Latency
AptX – Classic
AAC
SBC
A2DP v1.3.1
AVRCP v1.6.1
HFP v1.7.1
HSP v1.2
BLE GATT (Generic Attribute
Profile)
Tx mode: 2402MHz to 2480MHZ, ISM Band, Rx mode: 2402MHz
to 2480MHz, ISM Band
< 0r =10.0 dBm
AptX
AAC
SBC
9.2mm Dynamic Drive with Balanced Armature
10Hz to 20kHz
-
<0.3% (1kHz/10mW)
Up to 4 hours Bluetooth
15 minute charge = 2 hrs Bluetooth
Bluetooth
20cm USB-C to USB-C cable
8g for earbuds, 50g for charge case
9. Reset/Troubleshooting
9.1 Factory Reset
You can clear the paired devise history and restore all
setting to their defaults.
To factory reset the earbuds, open the charge case with
the ear buds placed inside. Press and hold the button on
the inside of the charge case for 5 seconds and release.
The indicator on the charge case will turn red to indicate
the reset.
Troubleshooting-
In the case of earbuds are not functioning properly,
please perform a factory reset to resolve the issue.
9.2 Hardware Reset
To hardware reset the earbuds, open the charge case with
the earbuds placed inside. Press and hold the button inside
the case for 15 seconds until LED indicator goes off and
illuminates in green to indicate completion of hardware
reset process.
Troubleshooting-
For a serious system crash (Solid LED Red Light),
please perform a Hardware Reset to resume the
earbuds.
10. Caring For Your Earphones
Your earphones can be cleaned by a damp cloth and gently
dabbing until clean. Do not use cleaning detergents,
rubbing alcohol, or chemical cleaners/polish, doing so may
damage your earphones.
11. Service / Support
If you need help troubleshooting a specific problem, or
simply have a question you would like answered, please
initially consult the Headphone support section of the
Bowers & Wilkins website:
www.bowerswilkins.com.
Weight
Boxed Accessories
Diagram 7
Secondary/Subsequent Headphone Streaming
Solid blue light once paired.
Secondary/Subsequent
HP in pairing mode.
H
o
ld the button for 3 secon
ds/
Flashing blue light.
Press the button 1X to START
,
2X to
STOP
.
Connect the case to the source.