P5 Wireless
ENGLISH Welcome to Bowers & Wilkins and P5 Wireless Headphones Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
ENGLISH 1. P5 Wireless Carton Contents i. P5 Wireless Headphones ii. USB charging cable iii. Universal cable iv. Quilted pouch v. Literature pack Environmental Information This product complies with international directives, including but not limited to the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, the Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) and the disposal of Waste Electrical and Electronic Equipment (WEEE).
ENGLISH 4. Switching On and Off To switch P5 Wireless on slide the power button to the right and hold for 1 second. To switch off slide the power button to the right and hold for 2 seconds. P5 Wireless will provide audible feedback as it switches on. Note: If P5 Wireless is left switched on but inactive for more than 20 minutes it will automatically turn off to save battery power. It can be woken by sliding the power button to the right. L L R R 5.
ENGLISH The P5 Wireless Bluetooth indicator will flash continuously while pairing is underway and blink once in every 4 seconds when pairing is established. P5 Wireless will also provide audible feedback when pairing is established. Note: If your Bluetooth audio source device does not support “simple” pairing and requests a four digit code, enter ‘0000’. Once a connection has been established, ensure that P5 Wireless is selected as the speaker output for the Bluetooth source device.
ENGLISH 9. P5 Wireless wired connection In addition to operating wirelessly, your P5 Wireless can be connected to a music source using the supplied universal cable. Cable connection is useful if the battery is low or if P5 Wireless is to be used with a non-Bluetooth audio source device. To connect the supplied cable to your P5 Wireless proceed as described in the following steps and illustrated in Diagram 3. Carefully pull the left ear pad away from the body of the ear piece.
Model P5 Wireless Description Wireless Headphones Technical features Bluetooth v3.0 ENGLISH Specifications Rechargeable lithium battery Nylon damped diaphragm Damping foam CCAW coil Drive units 2x 40mm (1.2 in) Full range Frequency range 10Hz - 20kHz Impedance 22 ohms (passive) Distortion (THD) <0.4% (1KHz/10mW) Sensitivity 109dB/V at 1kHz Inputs 3.5mm stereo mini jack (CTIA 4-pole) Micro USB 2.
