Use and Care Manual

109
6.Usinga6mmhexwrench,removetheindicatedhardwarefromthe
Crank Arm and Leg.
7. Remove the Leg and Pedal Assembly from the Frame Assembly.
8. Repeat steps 2-6 on the other side of the machine.
9.Placeastaticobject(likeabookorbox)underthebackofthemain
framebutnotundertheRailAssembly.Thestaticobject(*)shouldnotbe
compressible.
10.Usinga6mmhexwrenchanda13mmwrench,removethe2indicated
screws(byarrow)thatattachtheRailAssemblytotheIncline Arm.
Be aware that the Frame Assembly may be unstable and
slightly top heavy.
11.Usinga6mmhexwrench,removethe4indicatedscrews(byovals)
that attach the Rail Assembly to the Frame Assembly.
12. Remove the old Rail Assembly and replace with the new one.
Some components of the equipment can be heavy or
awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to
do heavy or awkward steps on your own.
NOTICE: This step may require two people.
13. Re-assemble the machine in the reverse order of when the parts were
removed.
Make sure the Upper Handlebar Arms are secure before you
exercise.
Note: Remove the plastic scratch guard strips from the Rails. If neces-
sary, apply silicone lubricant to a cloth and wipe the Rails to eliminate
roller noise.
14.FinalInspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Rail Assembly
Incline Arm