Use and Care Manual

129
9. Remove the Zip Ties that attach the Speed Sensor Cable to the Frame.
NOTICE: Do not crimp the cables.
10.Usinga#2Phillipsscrewdriver,removetheindicatedscrew(byarrow)
from the Speed Sensor Magnet.
11. Attach the replacement Zip Ties so they secure the cables to the
Frame.
12. Re-assemble the machine in the reverse order of when the parts were
removed.
13. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
SWITCH
PWR
3 2
4 1
L N
G
WIRELESS HR MODULE
CONSOLE
PCB
SERVO
SPEED
SENSOR
MCB
TO HR CONTACTS
LIFT MOTOR
ON/OFF
EARTH
GROUND
FAN
RIGHT
SPEAKER
LEFT
SPEAKER
USB PCB
WIRELESS HR
REMOTE
RESISTANCE
REMOTE
INCLINE
CONSOLE MAST
ENGINE
LEFT HANDLEBAR RIGHT HANDLEBAR
Speed Sensor
Servo Motor
Zip Ties