Use and Care Manual

141
NOTICE: ThisdocumentprovidesinstructionsforthereplacementoftheTransportWheelontheBowex
®
BXE116 / BXE216 Ellipticals.
If you need assistance, please call Bowflex Customer Service at 1-800-605-3369.
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2.Usinga#2Phillipsscrewdriver,removetheindicatedscrewfromthe
Front Stabilizer Shroud. Remove the Front Stabilizer Shroud.
3.Usinga13mmwrenchanda6mmhexwrench,removetheindicated
hardware from the Transport Wheel.
4.Usinga13mmwrenchanda6mmhexwrench,attachthenewTrans-
port Wheel to the Frame Assembly.
5. Re-assemble the machine in the reverse order of when the parts were
removed.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from
the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in
a secure location.
Transport Wheel
Front Stabilizer Shroud