Use and Care Manual

22
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1.Usinga6mmhexwrench,removetheindicatedhardwarefromthe
Lower Left Handlebar Arm and Pedal.
Be aware that the Handlebar Arm will be loose and will pivot
when the hardware is removed. Safely allow the Handlebar
Arm to pivot downward and come to rest. Be sure not to be in
the path of the Handlebar Arm.
Note: To assist with reassembly, observe how the Pivot Sleeve engages
ushwiththeLowerHandlebarArm.
2.UsingasmallStandardscrewdriver,removetheindicatedCap(byar-
row)fromtheFrameAssembly.
3.Usinga6mmhexwrench,removetheindicatedhardwarefromtheLeft
Crank Arm and Leg.