Use and Care Manual

42
3. Gently lift and remove the Console/Static Handlebar Assembly from the
ConsoleMastanddisconnectthevecables(theInput/Output,LiftMotor,
ResistanceControl,WirelessHeartRate,andInclineControlCables)that
come from the back of the Console.
Note: Do not let the Cables fall down inside the Console Mast. If neces-
sary, use a rubber band or wire tie to secure them. This step may require
two people.
4.UsingaStandardscrewdrivertogentlypry,unsnaptheExteriorPivot
Covers. Place them safely aside.
Exterior Pivot Cover