Use and Care Manual

13.Usinga6mmhexwrench,removethehardware(indicated)fromthe

Console Mast. Slightly pull the Mast up and disconnect the cables. Set the

hardware aside for reassembly.

NOTICE: Do not crimp the cables. Do not allow the cables to fall

down into the Main Unit or into the Console Mast. This

step may require two people.

14.Re-assemblethemachineinthereverseorderofwhenthepartswere

removed.

NOTICE: Do not crimp the cables.

15. Final Inspection

Inspect your machine to ensure that all hardware is tight and components

are properly assembled.

Do not use until the machine has been fully assembled and

inspected for correct performance in accordance with the

Owner’s Manual.