Use and Care Manual

5
FCC Compliance
!
Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
ThemachineandpowersupplycomplywithPart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynot
causeharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
ormoreofthefollowingmeasures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Safety Warning Labels and Serial Number
Metal Screw
Tab for Grounding
Screw
Adapter
Grounded
OutletBox
Grounded
Outlet
Grounding Pin
Grounding Instructions
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualied
electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product – if it will not t the outlet, have a proper outlet installed by a qualied electrician.
IfyouconnectthemachinetoanoutletwithGFI(groundfaultinterrupt)orAFI(arcfaultinterrupt),machineoperationcancausethecircuittotrip.
This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug illustrated below. A temporary
adapter that looks like the adapter illustrated may be used to connect this plug to a 2-pole receptacle as shown if a properly
grounded outlet is not available.
Thetemporaryadaptershouldbeusedonlyuntilaproperlygroundedoutletcanbeinstalledbyaqualiedelectrician.Thetabforthegrounding
screwmustbeconnectedtoapermanentgroundsuchasaproperlygroundedoutletboxcover.Whenevertheadapterisused,itmustbeheldin
place by a metal screw.