Use and Care Manual

50
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
1.UsingaStandardscrewdriver,removetheindicatedCap(byarrow)
from the Frame Assembly.
2.Usinga6mmhexwrench,removetheindicatedhardwarefromthe
Crank Arm and Leg.
3. Remove the Leg from the Crank Arm.
4.Usingasmallstandardscrewdriver,gentlyprytheCapoffofthecenter
of the Crank Cover.
5.Usinga#2Phillipsscrewdriver,removethe6indicatedscrews(ovals
andarrows)fromtheCrankCover.
NOTICE: To assist with re-assembly, observe that the white arrows
are the longer screws.
6. Re-assemble the machine in the reverse order of when the parts were
removed.
7. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Crank Cover
Crank Cover
Cap (removed from
center of Crank Cover)