Use and Care Manual

58
34.BeforefullyattachingtheShrouds,powerupthemachinetoverify
that the Magnet Arm can move freely, and that the Brake Magnet and
Flywheeldonottouchatthemaximumresistancelevel.
!
Machine is on. Current is active. There is risk of electrical
shock. Be sure to keep ngers clear of all pinch hazards
when you change the resistance level.
35. Re-assemble the machine in the reverse order of when the parts
wereremoved.PuttheLeftShroudinpositionrsttoalignthescrews
fortheRightShroud.Installthetopscrewsrst.Besurethetabsinthe
Motorized Lift Cover snap into the Side Shrouds.
NOTICE: This step may require two people. Be sure not to crimp
any cables.
Note: Self-tapping screws attach the Shrouds to the Frame.
36. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.