Use and Care Manual

60
1.Placeastaticobject(likeabookorbox)underthefrontofthemain
frame but not under the Front Stabilizer. The static object should not be
compressible.
2.Loosenandremovethe4screwsthatattachtheFrontStabilizerusing
a6mmhexwrench.
3. Safely remove the Front Stabilizer.
4.Re-assemblethemachineinthereverseorderofwhenthepartswere
removed.
5. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the Owner’s
Manual.
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place the power cord in a secure
location.
Front Stabilizer