Use and Care Manual

Handlebar Cable

8.Dependingonwhichcableisbeingreplaced(Inclineisleft,resistanceis

right),slightlypullthatHandlebarArmoffthemachinetoexposetheCable

Connections.

Note: These images show the left or Incline cable being replaced.

9. Disconnect the Handlebar Cable from the Upper Handlebar that goes

into the Console Mast.

10. Remove the Handlebar Arm from the machine.

11. Remove the Handlebar Arm from the machine.

12. If replacing both of the Upper Handlebar Cables, repeat steps 5-12 on

the other side of the machine.

13.Usinga#2Phillipsscrewdriver,removethescrewsthatsecurethe

Upper Shrouds and Tray.

Note: Be sure to observe how the Handlebar Cables route through the

Upper Shrouds to assist with re-assembly.