Use and Care Manual

87
19.Usingashort#2Phillipsscrewdriver,removetheindicatedscrews(by
arrows)fromtheMCBCover.CarefullyremovetheMCBcover.
NOTICE: Do not crimp the cables.
Note: Your machine may not match the image. For reference only.
20.Usinga#2Phillipsscrewdriver,removethetopscrewtofreetheLift
Motor ground wire. Hand tighten the top screw to hold the MCB Assembly
in position on the Frame until reassembly.
MCB Cover
Zip
Ties
Lift motor ground wire